Check the cabling coming from the power supply to the Engine PCA. Reconnect the power cord, then turn on the printer. Use the power switch at the rear to turn off the printer, then disconnect the power cord.Description:Problem with the power supply unit.Check the Power connection from PSU to Formatter. Reconnect the power cord and power on the E-Box. Remove the E-Box (see Open the E-Box) open it, and check that the cable of the nonfunctional cooling fan is correctly connected. Check the fans to see which is not rotating by checking for airflow coming from the ebox place a hand over the fan holes in the ebox underneath the printer to check for air coming from both fans. Description:Problem with the E-Box cooling fans.It's low probability, but possible, that a wrong connection could cause the damage to the carriage PCA and / or engine PCA.
T3500 remove side panel code#
NOTE: If the 02.1:10 is not solved after replacing the carriage PCA or after replacing it a SE 1.0:10 or SE 01.1:10 code appears (engine PCA), check the trailing cable connection to the engine PCA. Check that the Trailing Cable is correctly connected between the Engine PCA and Carriage PCA.
Description:Problem with the carriage PCA. If the problem persists, replace the engine PCA. If the problem persists, replace the Engine PCA. 
Reconnect the power cord, and then turn on the printer.
Description:Communication errors between engine PCA and formatter. In order to replace this part, you need to order the service kit CR357-67009 " Motor Media Advance Transmission with Encoder", then only use the Encoder PCA part from this kit. NOTE: The backup NVM is located in the Paper Path Encoder PCA. See Motor Media Advance Transmission with Encoder. If the cable is correctly connected, replace the encoder PCA. Check that the Encoder PCA Cable is correctly connected. Description:Problem with the backup NVM. See Engine PCA NOTE: If the 01.1:10 is not solved after replacing the engine PCA, or after replacing it a SE 02.1:10 code appears (carriage PCA), check the trailing cable to engine PCA connection It's low probability, but possible, that a wrong connection could cause the damage to the carriage PCA and / or engine PCA. NOTE: If the 01.0:10 is not solved after replacing the engine PCA, or after replacing it a SE 02.1:10 code appears (carriage PCA), check the trailing cable to engine PCA connection It's low probability, but possible, that a wrong connection could cause the damage to the carriage PCA and / or engine PCA. Description:Problem with the engine PCA.
0 kommentar(er)
